Savvy Offroad Krawler Lite Bolt-On Rear Bumper | 2018–2026 Jeep Wrangler JL / JLU

At just 12.5 lbs, the Savvy Offroad Krawler Lite Bolt-On Rear Bumper is the lightest high-performance aluminum rear bumper available for the 2018–2026 Jeep Wrangler JL and JLU. It delivers maximum departure angle, full factory hitch compatibility, integrated recovery points, and a modular replaceable skin, all with zero cutting, zero drilling, and zero modifications required. Bolt it on, hit the trail.

Built from 3/16" CNC laser-cut aluminum and race-proven through King of the Hammers, the Krawler Lite rear bumper fits tight to the body for the highest clearance of any bolt-on Jeep JL rear bumper on the market. Whether you're rock crawling, overlanding, or daily driving, this bumper handles it all without adding unnecessary weight to your rear end.

Key Features

• Lightest Bolt-On Rear Bumper for Jeep JL / JLU: Only 12.5 lbs. The factory steel rear bumper weighs nearly 5x that. Less unsprung weight means better handling, better fuel economy, and less rear sag on lifted builds.
• Maximum Departure Angle: Tight-fitting high-clearance design maximizes how steep an obstacle you can descend without the bumper catching. No hang-ups, no dragging.
• Direct Bolt-On, No Modifications: Mounts to factory Jeep JL / JLU frame points. No cutting, no drilling, no welding. Straightforward install with Factory hardware & included hardware.
• Factory Hitch Compatible: Works seamlessly with the stock Jeep JL receiver hitch. Tow your trailer, carry your bike rack, or run a hitch accessory without replacing anything.
• Integrated D-Ring Recovery Mounts: Heavy-duty 3/4" thick laser-cut steel D-ring shackle mounts are E-coated and ready to install. Strong, corrosion-resistant recovery points built into the bumper no add-ons needed.
• Replaceable Rear Skin: Take a hard hit on the trail? Replace just the outer skin, not the entire bumper. Faster repair, lower cost, less downtime.
• Custom Lighting Compatible: Designed to accept a wide range of off-road lighting. Use the included template with aftermarket lights to cut the skin for flush-mount fitment with Rigid Industries SR-L, Rigid Ignite, Baja Designs S1, and S2 lights. Lights sold separately.
• Backup Sensor Ready: Factory backup sensor holes are pre-cut into the bumper. Rubber sensor plugs included. Plug them if you don't run sensors. Cut the skin smooth if you want a clean look (see customer photo).
• Made in the USA: CNC laser-cut and precision-engineered from updated Jeep JL CAD models for exact fitment. Designed, tested, and built in America.

Specifications

• Fitment: 2018–2026 Jeep Wrangler JL / JLU (2-door and 4-door)
• Material: 3/16" CNC laser-cut aluminum
• Weight: 12.5 lbs
• Mounting: Direct bolt-on no cutting or drilling
• Hitch: Compatible with factory Jeep JL receiver hitch
• Recovery Points: Integrated 3/4" thick laser-cut D-ring shackle mounts, E-coated
• Lighting: Cuttable template for Rigid SR-L flush mount, Rigid Ignite, Baja Designs S1 & S2 (lights sold separately)
• Sensor Holes: Pre-cut Sensor Holders & rubber plugs included
• Finish: Ships raw aluminum ready for powder coat or paint
• Manufacturing: CNC laser-cut and bent in the USA
• Spare Tire: Can use with 40" spare tire

Best For

• 2018–2026 Jeep Wrangler JL / JLU owners replacing heavy factory steel bumpers
• Rock crawlers and trail rigs needing maximum departure angle
• Builds where rear weight reduction matters lifted Jeeps, performance-focused builds
• Daily-driven Jeeps that still need real recovery capability
• Jeep owners who tow and need factory hitch compatibility
• Builders who want custom lighting without buying a separate light bar bracket

Why Choose the Savvy Krawler Lite Jeep JL/JLU Rear Bumper?

Many Jeep JL rear bumpers add unnecessary bulk, reduce departure angle, or require sacrificing factory hitch compatibility. The Savvy Krawler Lite bolt-on rear bumper is designed to give you the clearance and protection you want while keeping the weight down and retaining compatibility with your stock receiver hitch.

For Jeep owners looking for a lightweight aluminum rear bumper for Jeep JL or JLU, this design combines high-clearance fitment, modular repairability, integrated recovery points, and customizable lighting options in one clean package. Whether your Jeep is a weekend trail rig, overland build, or dedicated crawler, this bumper is built to perform without the weight penalty of traditional steel bumpers.

Frequently Asked Questions

Does this fit both the 2-door JL and 4-door JLU?
Yes. The Krawler Lite bolt-on rear bumper fits all 2018–2026 Jeep Wrangler JL (2-door) and JLU (4-door) models.

Will this work with my factory tow hitch?
Yes. This bumper is specifically designed to work with the stock Jeep JL receiver hitch no modifications or hitch relocation required.

Why does the bumper in one photo not have sensor holes?
All bumpers ship with factory backup sensor holes pre-cut and rubber plugs included. The photo showing no holes is a customer build where the holes were welded shut and the bumper refinished. Your bumper will come with the holes and plugs as standard.

What lights does this bumper fit?
The rear skin can be trimmed for Rigid Industries SR-L Flush Mount, Rigid Ignite Flush Mount, and Baja Designs S1 & S2 Non-Flush Mount lights. All lights are sold separately.

Can I replace just the skin if I damage it on the trail?
Yes. The Krawler Lite uses a modular design the outer skin unbolts and replaces independently. You never need to buy a full new bumper after trail damage.

Does it ship painted or finished?
Ships raw aluminum. We recommend powder coating or painting to your preferred color before or after installation.