Savvy Offroad Krawler Lite Weld-On Rock Sliders | Jeep Works Stretched JL (JLL) — 2018–2026

Important: This product is designed exclusively for the Jeep Works Stretched JL (JLL) the custom long-wheelbase 2-door JL built by Jeep Works / Flo Built Conversions with a 12" body and frame stretch. It will not fit a standard Jeep Wrangler JL, JLU, or any other configuration. If you are not running a Jeep Works JLL stretched build, see our standard JL and JLU slider listings.

If you are running a Jeep Works JLL, you already know the problem: the stretched wheelbase and extended rocker panel that makes this build so capable on the trail also puts you in a category that virtually no aftermarket armor manufacturer has engineered for. Most slider options on the market will not fit your extended body correctly they are built for the stock JL wheelbase and leave the stretched section of your rocker panel unprotected.

The Savvy Offroad Krawler Lite Weld-On Rock Sliders for the JLL are purpose-built for the Jeep Works stretched JL's specific extended body and frame dimensions providing full rocker panel coverage across the entire stretched length, with fully boxed 3/16" steel frame brackets that weld permanently to the JLL's frame for the maximum possible strength. And like every Krawler Lite weld-on slider, the outer body skin unbolts and replaces without removing the slider from the frame the only weld-on slider design that gives you that capability.

Why the JLL Needs Purpose-Built Sliders

The Jeep Works JLL stretches the 2-door JL 12 inches over stock wheelbase extending the frame, the body, and the rocker panel in the process. That stretched rocker panel is longer than any standard JL or JLU slider was designed to cover. Installing a stock-length JL slider on a JLL leaves a gap in the middle or rear section of the rocker panel that is completely unprotected exactly where the extended wheelbase geometry places the body during trail articulation and obstacle contact.

The Savvy JLL sliders are designed to cover the full length of the JLL's extended rocker panel. This is not a JLU slider modified to fit it is a slider dimensioned for the JLL's actual stretched body geometry, sitting high and tight against the extended body the way a purpose-built part should.

The Feature No Other JLL Weld-On Slider Offers

When you weld a traditional rock slider to your JLL's frame, you accept one permanent trade-off: take a hard enough hit on the outer skin, and your options are cutting the slider off and replacing it, welding a patch, or living with the damage. On a custom build as unique as the JLL, none of those options are simple or cheap.

Savvy separates the structural frame brackets which weld permanently to the JLL frame for maximum strength from the outer body skin, which bolts on and unbolts independently. Damaged skin on the trail? Unbolt it. Bolt on a replacement. The frame brackets stay welded. The slider stays on the Jeep. This feature does not exist on virtually any other weld-on slider on the market and on a one-of-a-kind custom build, it matters more than on any standard platform.

Key Features

• Purpose-Built for the Jeep Works JLL Stretched Build: Dimensioned specifically for the JLL's extended body and frame geometry. Covers the full length of the stretched rocker panel not a stock JL slider adapted to fit, but a slider built for the JLL's actual dimensions. Fits 2018–2026 Jeep Works JLL stretched builds only.
• Fully Boxed Weld-On Frame Brackets: 3/16" fully boxed steel frame-mount brackets weld directly to the JLL's stretched frame for maximum possible strength and impact resistance. No flex, no rotation under hard hits, no compromise built for the kind of serious rock crawling that demands a custom stretched wheelbase in the first place.
• Replaceable Outer Skin, Unique to Savvy: The outer body skin bolts onto the welded frame brackets independently. Damaged? Unbolt it, bolt on a replacement. The welded brackets stay on the frame. On a custom JLL build where every part is difficult to source and replace, a slider system that repairs at the skin level rather than the structural level is not a convenience it is a necessity.
• 3/16" CNC Laser-Cut Steel Construction: Maximum strength without unnecessary bulk. Precision-cut for exact fitment on the JLL's stretched body dimensions. Every bend and cut CNC-formed for consistent, repeatable quality.
• High-Clearance, Low-Profile Fitment: Sits high and tight against the JLL body to maximize ground clearance across the full length of the extended rocker panel. Protects your rockers without hanging below the frame rail where it would catch on obstacles.
• Multi-Function Step Surface: The top skin provides a secure step for entry and exit across the full length of the extended body while staying low-profile enough to avoid snagging on trail obstacles.
• Long-Arm Suspension Compatible: Works with most aftermarket JL long-arm suspension kits. Verify fitment with your specific suspension setup before ordering given the custom nature of the JLL platform.
• King of the Hammers Proven: Born from the same racing program that has competed and won at King of the Hammers. The most demanding race in the country. The credentials that serious custom builders recognize.
• Ships Raw Steel: Powder coat or paint to your preferred color before installation. Finishing before welding provides the best corrosion protection on the frame bracket contact points.
• Made in the USA: CNC laser-cut and bent for precision fitment. Designed, tested, and built in America to Savvy's race-proven quality standard.

Specifications

• Fitment: Jeep Works Stretched JL (JLL) 2018–2026 base JL with Jeep Works / Flo Built 12" wheelbase stretch. Will NOT fit standard JL, JLU, or any other configuration.
• Material: 3/16" CNC laser-cut steel body skin and frame brackets
• Mounting: Weld-on frame brackets, fully boxed 3/16" steel, welded directly to JLL stretched frame
• Skin Design: Modular, outer skin bolts on and off independently of welded frame brackets
• Step Functionality: Top surface across full rocker length, step accessible while maintaining high-clearance profile
• Suspension Compatibility: Works with most aftermarket JL long-arm kits
• Installation: Welding to frame required professional welding strongly recommended
• Finish: Ships raw steel ready for powder coat or paint
• Manufacturing: CNC laser-cut and bent in the USA

Is This the Right Slider for Your Build?

This slider is designed for one specific configuration: the Jeep Works JLL  a 2-door Jeep Wrangler JL that has been stretched 12 inches in wheelbase by Jeep Works / Flo Built Conversions. If your build matches that description exactly, this is the slider that fits your rocker panel correctly and completely.

If you are running any of the following, this is not the correct product:

• Standard 2-door Jeep Wrangler JL (non-stretched) → See Savvy Krawler Lite Sliders for JL
• 4-door Jeep Wrangler JLU → See Savvy Krawler Lite Sliders for JLU
• Jeep Gladiator JT → See Savvy Krawler Lite Sliders for JT

If you are unsure whether your build qualifies as a JLL, contact us before ordering. The fitment on this product is specific to the JLL's stretched dimensions installing it on a non-stretched JL will result in incorrect fitment.

Best For

• Jeep Works JLL stretched JL builders who want purpose-built weld-on sliders that cover the full extended rocker panel correctly
• Custom JLL builds where the unique wheelbase demands armor that was actually designed for it not adapted from a stock platform
• Serious rock crawlers who chose the JLL platform specifically for its extended wheelbase capability and need sliders that match that capability level
• JLL builders who want weld-on strength but refuse to accept a one-piece slider they cannot cost-effectively repair after trail damage

Frequently Asked Questions

What exactly is a Jeep Works JLL?
The Jeep Works JLL (also built by Flo Built Conversions under the JLL designation) is a custom-stretched version of the 2-door Jeep Wrangler JL. The build involves a 12-inch stretch of both the frame and body, extending the wheelbase to create a long-wheelbase 2-door JL a configuration Jeep never produced from the factory. This product is designed specifically for that stretched configuration and will not fit a standard JL.

Will these fit a standard JL 2-door or JLU 4-door?
No. These sliders are dimensioned for the JLL's stretched body and frame geometry. Installing them on a non-stretched JL or JLU will result in incorrect fitment. See the Savvy Krawler Lite Sliders for JL and JLU for those platform-specific options.

Can I replace the outer skin without removing the slider from the frame?
Yes. The outer body skin bolts onto the welded frame brackets independently. If it gets damaged, unbolt it, bolt on a replacement the frame brackets stay welded to your JLL's frame throughout the process. No cutting, no removing the slider, no fabrication visit required. On a custom build this unique, that repairability is especially important.

Do I need a professional welder for installation?
Yes. The weld-on frame brackets must be welded directly to the JLL frame. Professional welding is strongly recommended particularly on a custom stretched build where frame geometry and weld placement are critical to the structural integrity of the installation.

Does this work with my long-arm suspension?
Designed to work with most aftermarket JL long-arm suspension kits. Given the custom nature of the JLL platform.

What finish does it ship in?
Raw steel. Powder coat or paint before installation particularly on the frame bracket contact points that will be welded to bare frame metal.

No instructions PDF available for this product.